
	*****************************************************
	*             ATAPI CD-ROM drive                    *
	*****************************************************

	/////////////////////////////////////////////////////
	///                                               ///
	///  Manual for using installer (DOS)             ///
	///                                               ///
	///             Making   date:  2/20/95           ///
	///             Modified date:  5/23/95           ///
	///             Written by  :  MKE(Panasonic)     ///
	/////////////////////////////////////////////////////

*******************************************************************************
	PC-DOS and MS-DOS installation Procedure
	(also supported for Windows 3.1)
*******************************************************************************

1. Supportted CD-ROM drive:
	<ATAPI Interface CD-ROM>
	CR-572-B (double speed, tray loading type)
	CR-574-B (quadruple speed, tray loading type)
	CR-581-x (quadruple speed, tray loading type)

2. Installer file name:
	INSTALL.EXE (Version 1.01, common file for installation)
	INSTALL.DAT (installation's data file for ATAPI CD-ROM)

3. Discription for execution:
	Please type following from the DOS prompt:
		'A:'[return]  or 'B:'[return]
		'INSTALL' [return]


Trademarks and Copyrights:
	PC-DOS is a trademarks of International Business Machines Corporation.
	MS-DOS is a trademark of Microsoft corporation.
	Windows 3.1 is a trademark of Microsoft corporation.
	Sound Blaster is a trademark of Creative Labs, Inc.



















------------ cut here ------------ cut here ------------ cut here ------------




	/////////////////////////////////////////////////////
	///                                               ///
	///Device Driver supported STATUS in CD-ROM drive ///
	///                                               ///
	///             Making   date:  3/ 3/95           ///
	///             Modified date:  5/23/95           ///
	///             Written by :  MKE(Panasonic)      ///
	/////////////////////////////////////////////////////

*******************************************************************************
(C)     PC-DOS and MS-DOS device driver support
	(also supported for Windows 3.1)
*******************************************************************************

1. Supported CD-ROM drives:
	<ATAPI Interface CD-ROM>
	CR-572-B (double speed, tray loading type)
	CR-574-B (quadruple speed, tray loading type)
	CR-581-x (quadruple speed, tray loading type)

2. Device Driver name:
	CR_ATAPI.SYS (Version 5.15)

3. Driver discription:
	[/D:xxxxxxx]    ---> Device name option
		ex.)DEVICE=CR_ATAPI.SYS /D:MSCD001

	*[/P:nnn]       ---> ATAPI base I/O Port Address(hex) option
		ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /P:nnn
		nnn==1F0, 170, 1E8 or 168
		Primary connection:     /P:1F0
		Secondary connection:   /P:170
		Tertiary connection:    /P:1E8(Sound Blaster IDE)
		Quaternary connection:  /P:168(Sound Blaster IDE)

	*[/I:xx]        ---> Interrupt number option(IRQ=10,11,12,14,15)
		ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /I:xx
		Primary connection:     xx==/I:14,10,11,12 or 15
		Secondary connection:   xx==/I:15,10,11,12 or 14
		Tertiary connection:    xx==/I:10,11,12,14 or 15
		Quaternary connection:  xx==/I:10,11,12,14 or 15

	*[/W:n]         ---> Waiting value option
		When PC read data from CD-ROM drive, Driver insert waiting
		value into read cycle one by one.
		If you are using PC that are not supported IOCHRDY, please set
		this value(waiting value).
		ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /W:n
		n==0, 1, 2, ... 255
			(For example 106usec/1 wait in 486DX2 66MHz)

	*[/Q]           ---> Non stop option
		Non stop(no message <A>bort, <R>etry) in initializing driver.
		ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /Q

	*[/E]           ---> Available error correction
		This option is available error correction for CD-G application.
		(Player for not including error correction)
		ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /E

	* : You can omit this option.



